Post by watchbandrenew on Mar 13, 2006 15:52:59 GMT -6
No matter how careful you are, wearing your watch will eventually cause scuffs and scratches. You don't have to live with the scratches anymore! Get rid of them quickly and easily and produce a brilliant mirror finish or a brushed/satin finish in just minutes!
To remove scratches and create a mirror finish on your watch you need to remove surface imperfections. How smooth do you think you can get a metal surface? Light reflecting off of a metal surface reveals the most minute imperfections. That is why you must precisely hone the surface down to tolerances measured in microns. 1 micron is equivalent to 0.00003937 inches or 0.001 millimeters.
Most people are not familiar with dealing in terms of microns; so to help put this into perspective consider the following:
►A Grain of Table Salt = 100 microns
►A Human Hair (average diameter) = 50-70 microns
►A White Blood Cell = 25 microns
►Talcum Powder = 10 microns
►A Red Blood Cell = 8 microns
►Bacteria (Cocci) = 2 microns
This kit will allow you to polish imperfections down to around 1 micron or less!
The assortment of abrasives included in this kit are: 30, 15, 9, 3, 2, & 1 micron.
There are 16 squares per sheet, each square measures approximately .8125" or 2.06 centimeters each. Each square is labeled with its micron rating to simplify the task of scratch removal and polishing. You will not find this system selling anywhere else, so if you're tired of paying a jeweler to touch up your watches or rings why not give this system a try?
The system is simple to use and comes with step-by-step instructions that explain how to produce a satin/brushed finish or a spectacular mirror finish on watches or rings. This kit can be taken anywhere and used anytime, there is no mess, no smelly solvents to wipe up, and no expensive equipment needed.
Deluxe Kit Pictured Below
The Deluxe kit includes a set of six optical grade micron abrasive sheets, a non-slip work pad, and a 2 part Jewelers Rouge Cloth!
The Rouge Cloth is impregnated with a sub-micron graded abrasive to further polish and bring out the luster in the metal.
If you have never owned one, you don't know what you are missing. A single Rouge Cloth will give you many years of service.
►►The Deluxe kit sells for $14.99 ($16.99 shipped in U.S., $17.99 shipped outside of U.S.)
If you already own a 2 Part Jeweler's Rouge cloth, the Basic kit is available without it.
►The Basic kit sells for $9.99 ($11.49 shipped in U.S, $12.49 shipped outside of U.S.)
PayPal and U.S. Money Orders only.. PayPal to: watchbandrenew@yahoo.com
Shipping is available WORLDWIDE!
These kits can be used on nearly any SOLID metal surface from Stainless Steel, Gold, Silver, Platinum, and Titanium just to name a few. Not intended for use on plated metals!
Your satisfaction is GUARANTEED, so get a kit today and get rid of the ugly scuffs and scratches!
Still Skeptical?
Try a sample! The samples are priced at $0.01 for each sample kit, and supplies are limited.
Sample Pack Pictured Below.
►In the U.S. the s&h charge is $0.99 so your total will be only $1.00 per sample kit!
►Outside the U.S the s&h charge is $1.24, for a total of just $1.25 per sample kit!
►►If you like the product and return to purchase a Basic or Deluxe kit I will even REFUND the money you paid for the Sample!◄◄
(A limit of one (1)sample kit refund per each Basic or Deluxe kit purchased.)
Paypal payments to: watchbandrenew@yahoo.com
Got questions? Great! I love em! Just email and I will try to answer as promptly as I can.
Wanna see the instructions? Just ask and I'll email a copy for you to review.
Please email any questions to: watchbandrenew@yahoo.com
To remove scratches and create a mirror finish on your watch you need to remove surface imperfections. How smooth do you think you can get a metal surface? Light reflecting off of a metal surface reveals the most minute imperfections. That is why you must precisely hone the surface down to tolerances measured in microns. 1 micron is equivalent to 0.00003937 inches or 0.001 millimeters.
Most people are not familiar with dealing in terms of microns; so to help put this into perspective consider the following:
►A Grain of Table Salt = 100 microns
►A Human Hair (average diameter) = 50-70 microns
►A White Blood Cell = 25 microns
►Talcum Powder = 10 microns
►A Red Blood Cell = 8 microns
►Bacteria (Cocci) = 2 microns
This kit will allow you to polish imperfections down to around 1 micron or less!
The assortment of abrasives included in this kit are: 30, 15, 9, 3, 2, & 1 micron.
There are 16 squares per sheet, each square measures approximately .8125" or 2.06 centimeters each. Each square is labeled with its micron rating to simplify the task of scratch removal and polishing. You will not find this system selling anywhere else, so if you're tired of paying a jeweler to touch up your watches or rings why not give this system a try?
The system is simple to use and comes with step-by-step instructions that explain how to produce a satin/brushed finish or a spectacular mirror finish on watches or rings. This kit can be taken anywhere and used anytime, there is no mess, no smelly solvents to wipe up, and no expensive equipment needed.
Deluxe Kit Pictured Below
The Deluxe kit includes a set of six optical grade micron abrasive sheets, a non-slip work pad, and a 2 part Jewelers Rouge Cloth!
The Rouge Cloth is impregnated with a sub-micron graded abrasive to further polish and bring out the luster in the metal.
If you have never owned one, you don't know what you are missing. A single Rouge Cloth will give you many years of service.
►►The Deluxe kit sells for $14.99 ($16.99 shipped in U.S., $17.99 shipped outside of U.S.)
If you already own a 2 Part Jeweler's Rouge cloth, the Basic kit is available without it.
►The Basic kit sells for $9.99 ($11.49 shipped in U.S, $12.49 shipped outside of U.S.)
PayPal and U.S. Money Orders only.. PayPal to: watchbandrenew@yahoo.com
Shipping is available WORLDWIDE!
These kits can be used on nearly any SOLID metal surface from Stainless Steel, Gold, Silver, Platinum, and Titanium just to name a few. Not intended for use on plated metals!
Your satisfaction is GUARANTEED, so get a kit today and get rid of the ugly scuffs and scratches!
Still Skeptical?
Try a sample! The samples are priced at $0.01 for each sample kit, and supplies are limited.
Sample Pack Pictured Below.
►In the U.S. the s&h charge is $0.99 so your total will be only $1.00 per sample kit!
►Outside the U.S the s&h charge is $1.24, for a total of just $1.25 per sample kit!
►►If you like the product and return to purchase a Basic or Deluxe kit I will even REFUND the money you paid for the Sample!◄◄
(A limit of one (1)sample kit refund per each Basic or Deluxe kit purchased.)
Paypal payments to: watchbandrenew@yahoo.com
Got questions? Great! I love em! Just email and I will try to answer as promptly as I can.
Wanna see the instructions? Just ask and I'll email a copy for you to review.
Please email any questions to: watchbandrenew@yahoo.com