salacak
New Member
Posts: 30
Since: Dec 10, 2006 6:10:34 GMT -6
|
Post by salacak on Jan 21, 2007 6:42:17 GMT -6
Any idea how to tighten bezel turns so easily.
|
|
|
|
Post by mike on Jan 21, 2007 7:37:08 GMT -6
If it's a unidirectional you might try removing the bezel and tightening the spring. Be carefull not to lose it!!!!! It's an easy fix for a watchmaker.  Also be carefull you don't scratch anything. |
|
salacak
New Member
Posts: 30
Since: Dec 10, 2006 6:10:34 GMT -6
|
Post by salacak on Jan 21, 2007 7:49:40 GMT -6
Thanks Mike
|
|
|
|
Post by Sam on Jan 21, 2007 8:20:59 GMT -6
Mike is right.  I'd take it to a watchmaker if I were you. I've found it really easy to take off a Rolex bezel, but I tried it on an Invicta and it didn't turn out so well. ;D |
|
salacak
New Member
Posts: 30
Since: Dec 10, 2006 6:10:34 GMT -6
|
Post by salacak on Jan 21, 2007 11:49:44 GMT -6
that's what I'm going to do, I won't try myself.
|
|
I'd take it to a watchmaker if I were you. I've found it really easy to take off a Rolex bezel, but I tried it on an Invicta and it didn't turn out so well. ;D